No matter what your industrial coating needs are, we can help – from pipeline wrap and repair, to tank rehabilitation, to crack repair and waterproofing, BCI has a solution that will work.

 

Containment Leak and Crack Repair

 

Traditional crack repair with caulking and flexible sealants cannot always handle concrete movement and large temperature fluctuations. SC-3900 seals and bridges hairline cracks and large moving joints to properly seal the area and provide long-lasting protection.

  • Bridges large gaps
  • Stops active leaks
  • Provides high-strength
  • Offers superior elongation
  • Stops deterioration
  • Stops freeze thaw
Before (left) and after (right) applying spray liner

 

Coating Solutions for the Wastewater and Water Industry

 

Proven, SC-3900 water tank coating spray technology provides leak-proof environmental protection, even in the most aggressive environments.

System Highlights

Industrial strength coating SC-3900 complies with NSF/ANSI Standard 61 Section 5 2011, is approved for secondary containment by the Florida Department of Environmental Protection Agency, and meets environmental compliance regulations nationwide. Suitable for all industrial environments, with a 20-plus year life expectancy.

  • Restores structural integrity
  • Low-temperature application
  • 3700- to 5500 psi tensile strength
  • High-temperature resistant
  • UV-resistant
  • No VOCs
  • Abrasion and corrosion resistant

 

Industrial Water Tank Coating Solutions

Successfully tested by an ANSI nationally accredited lab, potable water elastomers extend the service life of water management infrastructure and help preserve a precious natural resource.

  • Resistant to harsh out gassing
  • Prevents and corrects inflow and infiltration (I&I) issues
Seals old, brittle bolts to prevent leaks including sump areas that accumulate sludge.

 

Water tank coating spray technology repairs cracks and leaks.
Seals concrete scaling and leaks throughout the wastewater/water system.

 

Before: Structural issues prior to coating.
After: UV and corrosion resistant high-strength coating for tanks.

 

Tank and Geodesic Dome Roof Repair

Many aboveground storage tanks (ASTs) used in the oil and gas industry have geodesic dome roofs. Typically constructed from aluminum for their corrosion-resistant properties, over time daily thermal expansions and contractions work to create gaps between the panels. These gaps allow corrosive gas vapors and hazardous contaminants to escape from the tank. The gaps also allow humidity, airborne chlorides, and particulates to infiltrate the tank and contaminate its contents.

Traditional methods of repairing geodesic domes--like replacing the panels or sealing gaps with tape--are expensive and labor-intensive. BCI offers an alternative solution with its SC-3900 spray-applied, flexible coating system.

Multiple geodome roofs sealed to prevent future issues
Gaps between panels completely sealed

 

The coating is applied directly over the seal and cures very quickly. It is much stronger than tape, and chemically resistant to fuels, sulfuric acid and leachate water and the vapors they emit. Additionally, SC-3900 can be applied while the tank is in service, eliminating down time.

Once dry, the flexible coating moves with the tank roof, even as temperature and weather fluctuate. Once the dome roof is sealed with SC-3900, noxious odors and vapor loss are substantially reduced.

Download: Rehabilitating Faulty Seals and Leaks on Geodesic Domes (PDF)

System Highlights

  • Repair and seal leaks
  • Bridges gaps between panels caused by daily thermal expansions and contractions
  • UV-, abrasion-, and corrosion-resistant
  • Can be applied while tank is in service -- no down time!
  • Can be applied to aluminum, steel, and concrete
  • Permanently seals Geodome panel gaskets, eliminating possible replacement needs

 

Pipeline Repair

 

Designed for repairing high-pressure transmission pipelines. Repairs straight pipe, elbows, tees, reducers, risers, high temperature, underwater and offshore platform pipelines. All of our industrial coating products, including our corrosion resistant coatings, have been used around the world and in applications ranging from petroleum pipelines, to foundations for gas compressors.

Basic Concepts is the world leader in the portable spill containment market because we offer high quality products that have features that customers prefer year after year! Please call to discuss your secondary containment requirements with one of our experienced, on-staff technical sales representatives. We’ll gladly supply references, comparative test data, and sample spill containment materials to help you make an informed decision. Basic Concepts is part of the Justrite Safety Group.

Request A Quote
X

Custom Order Request Form

Basic Concepts has the ability to customize our products for many of your specific applications. Whatever your requirements, our custom solution will be durable enough for the most stringent spill control requirements. We are committed to providing the best solution for your needs. We will be happy to customize this or any other spill berm to satisfy any of your size requirements and applications.


gclid: Campaign Name: Keyword: