This website uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Please review our Privacy Policy for more information.
Filtration System, EVAC
EVAC Filtration System uses state-of-the-art filtration technology to remove suspended solids and light hydrocarbon sheen from water discharge operations in vaults, manholes, bilges, tanks, construction sites, elevator shafts and more. Its unique three-layer system adsorbs hydrocarbons, removes large and fine sediment, and polishes the water.
Overview
- Dimensions (W x D) - EVAC Filtration Systems measures 12" x 57", EVAC Filter measures 12" x 50"
- Description - Flow Rate: 150+ GPM depending on the pump used. Flowrate diminishes as filter becomes laden with sediment. We suggest you use a centrifugal pump that generates around 10 PSI. Hydrocarbon Solidifier Pillow captures sheen and light hydrocarbons; Camlock quick connect fitting; UN Certified pail with sure seal screw top lid. Camlock couplings available in Male and Female; 2" and 3"; specials available on request
- Absorbency Capacity Gal (L) - Filter constructed of a non-woven geotextile that is lipophilic (adsorbs 10 times its weight in hydrocarbons), is hydrophobic, and exceeds MARV 97.7%
Full Description
The EVAC Filtration System comes with a Camlock quick connect fitting and is packaged in a UN certified liquid-tight container. The filtration bag is reusable.
EVAC Filtration System is ideal for pumping contaminated water from underground utility vaults, manholes, retention and secondary containment vessels, out-fall on oil-water separators and elevator shafts. Attach the EVAC Filtration System to the hose on the out-fall side of a centrifugal pump and let the water flow through the device. The EVAC can also filter water in a gravity flow application.
Benefits
- Easy to use
- Eliminates the useof vacuum trucks and expensive water processing fees
- Can be re-used
- Uses a Hydrocarbon Detection Strip to indicate when filter is nearing maximum hydrocarbon retention level
